Joysway Eaglet Seaplane RTF Brushed RC Plane 2.4GHz

The Joysway Eaglet is designed as the perfect first float plane. Weighing in at only 145g and with a compact size (620mm wingspan) it is especially suited to smaller flying sites. The EPO construction gives a nice smooth surface finish whilst remaining tough and lightweight.

Assembly takes minimal time thanks to the pre-installed brushed motor, 5amp ESC, 2S 7.4v 400mAh Li-Po battery, 3x 2.5g micro servos. This Ready-To-Fly configuration also includes a Joysway Mode 2 2.4GHz transmitter and receiver.


  • Powerful brushless motor and ESC included.
  • Crash-resistant EPO fuselage and wing.
  • Powerful 180 size brushed motor.
  • Mode 2 2.4GHz 4 channel digital proportional control transmitter with mix control and 70%/100% dual rate function.
  • Micro receiver and 5A electronic speed controller.
  • 7.4V 400mAh Li-ion battery pack.
  • 2S balance battery charger with DC adaptor.
  • 2.5g micro server X 3 for aileron, elevator and rudder.
  • Two blade plastic propeller X 2 (one spare).


  • Wingspan: 620mm.
  • Length: 538mm.
  • Weight: 145g.
  • Servos: 3 Micro (Inc.).
  • Radio System: 4 Channel (Included).
  • Electric Motor: Brushed 180.
  • LiPo: 2S 7.4V 400mAh.
  • Speed Controller: 5A Brushed.

Required to Complete

  • 4 X AA alkaline batteries for transmitter.

Requires stated parts to complete, basic assembly. Supplied with instruction manual.

Please Note: If you have not flown an RC model before you will need to learn. Flying any model aircraft requires some degree of care and skill, even the simplest 2 or 3 channel. We recommend you read the manufacturers instructions and prepare for your first flight. There are many useful guides to learning to fly RC aircraft and if you are still unsure help will be readily available at your local club. We recommend a range test before you fly. Your model will have a warranty but this will not cover damage to propellers, wings, fuselage, tail or any other part sustained due to pilot error or loss of transmitter signal. In simple terms, if you crash it, you will be responsible for the repair!!